Self-adhesive flange tape made from multi-directional oriented expanded PTFE. Allows sealing of uneven and damaged flanges at the lowest possible tightening torque.
Availability on request.Contact us
Self-adhesive flange tape made from multi-directional oriented expanded PTFE. The lowest cold flow, the highest resistance to creep under load. Almost no width increase - also suitable for tongue and groove joints. Allows sealing of uneven and damaged flanges at the lowest possible tightening torque - high tightness.
- The best compression and back-pressure ratio of all supplied types.
- Suitable for wide flanges with uneven surface or higher surface roughness.
- Due to its high adaptability and elasticity, these tapes are an optimal seal for enamelled flanges that are sensitive to tightening pressures.
- Mixers, suction piping, pumps, flanges of large diameters and unevenness, tank holes, enameled flanges, large pressure vessels, tubular and other heat exchangers.
|Minimum Operating Temperature:||-268 °C|
|Maximum Operating Temperature:||+260 °C|
|Maximum working pressure:||vacuum to 40 bar|
|Compressibility (ASTM F 36):||70 %|
|Recovery (ASTM F 36):||10 %|
|pH:||0 - 14|
|Specific gravity:||0,7 g/cm3|
|Width mm||Thickness 2,0 mm||Thickness 3,0 mm||Thickness 6,0 mm||Thickness 9,0 mm|